Skip to main content

You are viewing information for Australian and NZ students. View international

Undergraduate

Electrical and Electronic Engineering Major (BEng Hons)

Electrical and Electronic Engineering Major (BEng Hons) - BEng(Hons)(Curtin) - MJRH-ELELE Science and Engineering
Minimum ATAR 80 This figure refers to the ATAR level below which an application will not be considered. This is not a guarantee of admission.
STAT entry STAT is not accepted for entry, but may be used to meet English competency requirements. STAT entry - The Special Tertiary Admissions Test (STAT) assesses competencies considered important for success at uni. These tests are provided by the Tertiary Institutions Service Centre (TISC) to help mature age candidates apply for certain courses.
Location Bentley
Study method Full-time or part-time
Study mode On-campus
Intake February or July
Duration 4 years full-time

Course overview

Students taking this major can specialise in either Electrical Power Engineering, or Electronic Engineering. There is hardly any aspect of modern civilisation that is not dependent upon electrical energy. It is used for heating, cooling, lighting, transportation, manufacturing and production, minerals processing, to name just a few areas of application. Electrical power engineering considers these applications of electrical energy, together with its generation, transmission and distribution, as well as the harnessing of sources of renewable and sustainable energy.

Electronic engineering is one of the fastest growing technology areas internationally, and job opportunities in this field abound. With the rapid progress of the information society, the role of electronic communication and embedded systems (Internet of Things or IoT) is becoming even more crucial to increased industry efficiency and competitiveness. The reason lies in the decentralisation of computing power in both the office and factory environment and the ability of specialised communication networks to link all geographically and spatially separated elements. In this specialisation students will learn about the theoretical and practical aspects of modern digital, electronic and communication systems.

More recently, the fields of electrical engineering and electronic engineering are starting to converge as society seeks more efficient, safe, reliable, and environmentally friendly solutions to engineering problems. For example, smart grids use electronic and computer technologies to achieve better management of electricity consumption and safety in commercial and domestic environments. This Major will allow students to gain expertise in both the electrical and electronic engineering fields.

In the first year, students will complete the Engineering Foundation Year (EFY). The EFY builds a solid base of the fundamental concepts common to all areas of engineering and was developed in partnership with industry to create a curriculum that is reflective of engineering practice. The second year is common to all electrical and electronic engineering with specialisation units included in the final two years of the program. In the final year of study, students will undertake a major research or design project.

To satisfy professional requirements, students must complete at least 12 weeks or equivalent of exposure to professional engineering practice. This requirement can be met by appropriate work experience or through a combination of technical and non-technical activities. Students must demonstrate that they have met these requirements by using a formal Log Book to record their professional experiences during the period of their degree study.

Admission criteria

Admission criteria for Australian and New Zealand students

English language proficiency

Curtin requires all applicants to demonstrate proficiency in English. Specific English requirements for this course are as outlined in the IELTS table below. Additional information on how you can meet the English requirement can be found on the English proficiency page.

IELTS Academic (International English Language Testing System)
Writing 6.0
Speaking 6.0
Reading 6.0
Listening 6.0
Overall band score 6.0

Applicants with recent secondary education (within the past two years) Applicants with recent secondary education are those whose admission is primarily based on the completion of Year 12 within the last two years, but also includes those who may have completed their senior secondary studies with a TAFE or other VET provider within the same time frame. This includes applicants whose secondary education was undertaken interstate or overseas.

  • Minimum ATAR: 80 This figure refers to the ATAR level below which an application will not be considered. This is not a guarantee of admission.
  • Essential WACE subjects (pre-requisites):
    •  Mathematics Methods ATAR and at least one of the following: Physics ATAR, Chemistry ATAR, Engineering Studies ATAR or equivalent.
  • Desirable WACE subjects: Mathematics Specialist ATAR

Please see our correlation comparability for previous TEE subjects, WACE courses and WACE ATAR courses.

Other admission options
Lowest ATAR to which an offer was made (exclusive of any adjustment factors such as equity or subject bonus points)

View the lowest ATAR (excluding adjustments) of an applicant who was offered a place in this course in the most relevant recent intake period for which data are available.

Lowest selection rank to which a recent Year 12 student offer was made (including the consideration of any equity or other adjustment factors)

View the lowest selection rank (incorporating ATAR plus any adjustments) of an applicant to which an offer of a place was made in the most relevant recent intake period, this includes any ATAR adjustments.

Selection rank adjustments (previously referred to as ATAR-related adjustments)

Details of the types of adjustment factors (bonus points) commonly available to applicants can be found on our StepUp to Curtin page.

ATAR and selection rank profile for those offered places wholly or partly on the basis of ATAR in the most recent intake period

View data on the ATAR and selection rank profile of offers made from the most relevant recent intake period.

Applicants with higher education study Applicants with higher education study are those whose highest level of study since leaving secondary education is a higher education course, whether at a university or non-university provider.

  • Curtin offers a variety of bridging courses to help you meet the admission criteria for this course. Find out more about our bridging courses.
  • Essential WACE subjects (pre-requisites):
    •  Mathematics Methods ATAR and at least one of the following: Physics ATAR, Chemistry ATAR, Engineering Studies ATAR or equivalent.
  • Desirable WACE subjects: Mathematics Specialist ATAR

Please see our correlation comparability for previous TEE subjects, WACE courses and WACE ATAR courses.

Curtin course switcher criteria

To switch into this course, you need to have:

  • attained an ATAR of 80 and completed the prerequisites; or
  • if you have studied Maths Applications or equivalent:
    • completed 75 credits within one semester with a semester weighted average (SWA) of at least 70%; or
    • completed 100 credits within one semester with SWA of 65% or higher, plus any unit/s assessed as comparable to Maths Methods ATAR and Physics ATAR and Chemistry ATAR; or
  • if you have studied Maths Methods or equivalent:
    • completed 75 credits within one semester with an SWA of 65%; or
    • completed 100 credits within one semester with an SWA of 60% or higher, plus any unit/s assessed as comparable to Maths Methods ATAR, and Physics ATAR or Chemistry ATAR.

The Maths Methods prerequisite can be met with:

  • Maths Methods ATAR; or
  • MATH1013 Introductory Mathematics or MATH1005 Pre-Calculus (12.5 credits); and
  • MATH1014 Foundations of Calculus.

The Physics ATAR prerequisite can be met with:

  • Physics ATAR; or
  • PHYS1006 Foundations of Physics.

The Chemistry ATAR prerequisite can be met with:

  • Chemistry ATAR; or
  • CHEM1003 Introduction to Chemistry.
Other higher education course switcher criteria

To switch into this course from another higher education course, you need to have:

  • attained an ATAR of 80 plus any unit/s assessed as comparable to Maths Methods ATAR, and Physics ATAR or Chemistry ATAR; or
  • if you have studied Maths Applications or equivalent:
    • completed 75 credits within one semester, with a semester weighted average (SWA) of 70%; or
    • completed 100 credits within one semester, with an SWA of 65% or higher, plus any unit/s assessed as comparable to Maths Methods ATAR, and Physics ATAR or Chemistry ATAR; or
  • if you have studied Maths Methods or equivalent:
    • completed 75 credits within one semester, with an SWA of 65%; or
    • completed 100 credits within one semester, with an SWA of 60% or higher, plus any unit/s assessed as comparable to Maths Methods ATAR, and Physics ATAR or Chemistry ATAR.

Applicants with vocational education and training (VET) study Applicants with vocational education and training (VET) study are those whose highest level of study since leaving secondary education is a VET course. This includes study at a public TAFE or other VET provider, whether a qualification was completed or not. Applicants with VET study may have other qualifications such as a Year 10 or Year 12 secondary school certificate.

  • Minimum ATAR: 80 This figure refers to the ATAR level below which an application will not be considered. This is not a guarantee of admission.
  • Essential WACE subjects (pre-requisites):
    •  Mathematics Methods ATAR and at least one of the following: Physics ATAR, Chemistry ATAR, Engineering Studies ATAR or equivalent.
  • Desirable WACE subjects: Mathematics Specialist ATAR
  • Please see our correlation comparability for previous TEE subjects, WACE courses and WACE ATAR courses.

Applicants with work and life experience Applicants with work and life experience are those who left secondary education more than two years ago (i.e. who are not classified as recent secondary education applicants) and have not undertaken vocational education training (VET) or higher education study since then.

'Experience' includes a combination of factors sufficient to demonstrate readiness for higher education such as mature-age entry, professional experience whether completion of the Special Tertiary Admission Test (STAT) is required or not, community involvement or work experience. Applicants may have undertaken non-formal programs that have helped prepare them for tertiary education or are relevant to the proposed higher education field of study.

  • Minimum ATAR: 80 This figure refers to the ATAR level below which an application will not be considered. This is not a guarantee of admission.
  • Essential WACE subjects (pre-requisites):
    •  Mathematics Methods ATAR and at least one of the following: Physics ATAR, Chemistry ATAR, Engineering Studies ATAR or equivalent.
  • Desirable WACE subjects: Mathematics Specialist ATAR

Please see our correlation comparability for previous TEE subjects, WACE courses and WACE ATAR courses.

In addition to the course-specific admission criteria listed above, please read our general admission criteria. Our general admission criteria apply to all courses at Curtin University.

Fees

Fees for Australian and New Zealand students

Year Student type Cost
2018 Commonwealth supported What is a Commonwealth supported place (CSP)? - A CSP is subsidised by the Australian Government. They pay part of the course fees directly to Curtin and then the student pays the remainder (referred to as the "student contribution amount"). The student can defer this fee to their HECS-HELP loan.

All Australian students studying an undergraduate degree are automatically awarded a Commonwealth supported place. A limited number of Commonwealth supported places are also available for some postgraduate courses.

Learn more about CSPs and whether you're eligible by visiting the Australian Government's StudyAssist website.
$9,260*

Fees are indicative first year only and are subject to passage of legislation.

*The indicative first-year fee is calculated on 200 credit points, which is the typical full-time study load per year, however some courses require additional study to be completed, in which case the fee will be higher than that shown.

This fee is a guide only. It may vary depending on the units you choose and do not include incidental fees (such as lab coats or art supplies) or the cost of your textbooks - visit other fees and charges for more information. For more information on fees and to determine your eligibility for HECS-HELP or FEE-HELP, please visit fee basics or the Study Assist website

If you're not an Australian citizen, permanent resident or New Zealand citizen, please see information for international students.

Professional recognition

Accreditation by Engineers Australia and the Engineering Accreditation Council Malaysia will be sought.

Advanced standing/credit transfer/recognition of prior learning (RPL)

Credit for recognised learning (CRL) is the term Curtin uses to describe advanced standing, academic credit or recognition of prior learning.

You may be entitled to credit for recognised learning for formal, non-formal or informal learning.

Formal learning is learning that takes place through a structured program of learning that leads to the full or partial achievement of an officially recognised qualification. Recognised institutions include, but are not limited to, RTO providers and universities. Non-formal learning is adult and community education. Informal learning can include on the job learning or various kinds of work and life experience.

Credit can reduce the amount of study needed to complete a degree.

For further information, please visit our credit for recognised learning webpage or contact our CRL Office on crl@curtin.edu.au or 1300 222 888.

How this course will make you industry ready

The course receives inputs from an Industry Advisory Board to ensure the course matches current industry needs and expectations. In the final year, students undertake a 2-semester research and design capstone project to demonstrate their abilities. Students are also required to complete 480 hours of exposure to professional engineering practice to prepare them for the workplace.

Student profile

View our student profile table to get an indication of the likely peer cohort for new students at Curtin University. This table provides data on students that commenced undergraduate study and passed the census date in the most relevant recent intake period for which data are available. It includes those admitted through all offer rounds and international students studying in Australia.